ML_MODE

ML_MODE = [string]
Default: ML_MODE = NONE

Description: String-based tag selecting operation mode for machine learning force fields.

Mind: This tag is only available as of VASP.6.4.0.

This tag acts as a "super tag" and selects the operation mode by selecting the defaults for all other tags. Every tag that is affected by this "super tag" can be overwritten by the user by simply specifying the value for that tag. The following options are available for this tag:

ML_MODE = TRAIN or train:

Force predictions from the machine learning force field are used to drive the molecular dynamics (MD) simulation. However, if the error estimation performed in each time step indicates a high force error an ab initio calculation is performed instead and the collected energy, forces, and stress are used to improve the machine learning force field.

There are two possible cases depending on, whether an ML_AB is present in the calculation folder or not:

- No ML_AB file: On-the-fly training, starting from scratch.

Sets: ML_ISTART = 0

At the beginning of the MD run, there is no force field available and ab initio calculations will happen frequently.

- ML_AB file present: On-the-fly training, taking into account pre-existing ab initio data.

Sets: ML_ISTART = 1

This is the usual choice for continuing a previous MD simulation with activated machine learning. Before the MD run starts the ML_AB file, copied from ML_ABN from a previous run, is read and the ab initio data (energies, forces, and stresses) and local reference configurations it contains are used to generate an initial force field. Subsequently, the on-the-fly training MD is started.

The ML_AB file does not necessarily need to contain structures matching the current starting configuration in the POSCAR file in terms of the simulation box, present elements, or the number of atoms. However, if the same elements appear the initial force field is of course used for predictions. In any case, the provided training data is included in the finally generated machine learning force field, i.e. the ML_FFN file will define a force field applicable to both, the structures in the ML_AB file and the current MD simulation.

By restarting repeatedly with ML_MODE=TRAIN while providing an ML_AB file from the last run it is possible to iteratively extend the applicability of the resulting machine learning force field, e.g. by exploring different temperature ranges or element compositions.

ML_MODE = SELECT or select: Train a force field by reselection of local reference configurations from an existing ML_AB file.

Sets: ML_ISTART = 3, NSW = 1, and ML_CDOUB = 4

In this operation mode, a new machine learning force field is generated from ab initio data provided in the ML_AB file. The structures are read in and processed one by one as if harvested via an MD simulation. In other words, the same steps are performed as in on-the-fly training but the source of data is not an MD run but the series of structures available in ML_AB. This mode will ignore the list of local reference configurations in the ML_AB file and instead will determine a new collection which is written to the resulting ML_ABN file. A new iteration through the training structures can lead to a frequent update of the force field. This is quite time-consuming. Increasing ML_CDOUB from 2 to 4 for this mode will result in a much less frequent update of the force field. This leads to much more efficient calculations while practically not changing the results. The ML_AB file may contain values for CTIFOR for each training structure. These are the thresholds used to sample that structure from the previous training. If a value for ML_CTIFOR is specified in the INCAR file, that value is then used and the thresholds from the ML_AB are ignored. Otherwise: 1) If thresholds exist in the ML_AB they are used. 2) If no thresholds are specified the default value for ML_CTIFOR is used.

Tip: If calculations for ML_MODE = SELECT are too time-consuming, it is useful to increase ML_MCONF_NEW to values around 10-16. Together with ML_CDOUB = 4, this often accelerates the calculations by a factor of 2-4.

Mind: This operation mode needs to be used to generate VASP machine learning force fields from pre-computed or external ab initio data sets.

ML_MODE = REFIT or refit: Refitting of the force field from an existing ML_AB file using the fast version. The following tags are set: ML_ISTART=4 ; ML_LFAST=.TRUE. ; NSW=1 ; ML_IALGO_LINREG=4 ; ML_SIGW0 = 1E-7 ; ML_SIGV0 = 1 ; ML_EPS_LOW = 1E-11. Similar to ML_MODE = SELECT refitting is done based on an existing ML_AB file, but the number of local reference configurations for each species is taken from the ML_AB file. Sparsification is performed on the local reference configurations, so the resulting ML_ABN might contain the same number or fewer local reference configurations than the ML_AB file.

Warning: We strongly advise to use ML_MODE = REFIT if no error estimates are required during production runs.

ML_MODE = REFITBAYESIAN or refitbayesian (deprecated); Same as ML_MODE = REFIT but Bayesian regression is employed. The following tags are set: ML_ISTART=4 ; NSW=1 ; ML_IALGO_LINREG=1 ; ML_LFAST=.FALSE.. This results in lower accuracy and much slower force fields than using ML_MODE = REFIT and should be used with caution. On the other hand, this mode allows the generation of ML_FFN files that can calculate Bayesian error estimates.
ML_MODE = RUN or run: Force field only mode is executed (ML_ISTART=2). This mode requires an ML_FF file. In this mode, the previously trained machine learning force field is read from the ML_FF file. The MD simulation is driven with predictions from the force field only, no ab initio calculations are performed and no learning is executed. This setting is typically used when the machine learning force field is considered mature and ready for production runs. Optionally if the force field was refitted using ML_MODE=REFITBAYESIAN, the Bayesian error estimate of the energies, forces, and stress can be computed and logged in the ML_LOGFILE by setting the output frequency of the Bayesian errors ML_IERR. The default is ML_IERR=0.
ML_MODE = NONE or none: This tag is not used.

If any option other than the above is chosen or any of them is misspelled (be careful to write everything in upper case or lower case letters) the code will exit with an error.

Tip: The user may overwrite the default by specifying any of the machine learning tags in the INCAR file.

Related tags and articles